induction brazing
英 [ɪnˈdʌkʃn ˈbreɪzɪŋ]
美 [ɪnˈdʌkʃn ˈbræzɪŋ]
网络 感应钎焊
双语例句
- Improvement of High-frequency Induction Brazing Process for Brass and Stainless Steel Tube
黄铜与不锈钢管高频感应钎焊工艺的改进 - The article introduces a technique of medium frequency induction brazing in electrical machine's end to end joint sleeves of rotor.
研究了一种发电机定子嵌线的中频感应钎焊方法。 - The hi-frequency induction brazing process of PCD tools was summarized in details, and the research status of the PCD tools brazing technology home and abroad was introduced in this paper.
对PCD刀具高频感应钎焊工艺和国内外PCD刀具钎焊技术的研究现状进行了较为详细的阐述，并对国内PCD刀具钎焊技术的发展进行了展望。 - A new frequency tracking technology is proposed to keep the inverter induction brazing at resonance state and ensure the reliability of power source.
设计了独特的准谐振频率自动跟踪技术，使感应加热回路始终工作在最佳的谐振状态，确保了电源主电路安全可靠工作。 - Wear Characteristics of Induction Brazing Diamond during the Grinding of Stone
石材磨削中感应钎焊金刚石磨损特征研究 - Study on the Hi-frequency Induction Brazing of Diamond Tools
金刚石刀具高频感应钎焊工艺的研究 - The experiment results show the weld strength obtained by vacuum brazing is higher than that of induction brazing and the sealing effect is good.
结果表明，真空钎焊钎缝比高频钎焊钎缝与母材结合强度高、密封性好。 - A temperature control system based fuzzy-control is developed with LabWindows/ CVI. Experiment of induction brazing diamond tool indicate the control system can work according to desired temperature program, and have characteristics of high control precision of temperature and a wide range of applications.
采用LabWindows/CVI开发了基于模糊控制算法的温度控制系统，进行了钎焊金刚石工具的试验，结果表明：该温控系统能实现预定的工艺曲线，控温精度高、适用范围广。 - Design of Temperature Monitor System for PDC Bits High Frequency Induction Brazing Based on VB
用VB实现PDC钻头高频感应焊接温度监控系统设计 - The bonding between steel and diamond was performed by induction brazing under controlled temperature and time. The filled intermediate layer materials are reactive metal Cr powder and Ag-Cu alloy foil.
利用高频感应钎焊的方法，以Ag-Cu合金和Cr粉为钎料，在一定的钎焊工艺条件下进行了实验研究，实现了金刚石与钢基体间的牢固化学冶金结合。 - Influence of Induction Brazing Process on Microstructures of Brass Joint
感应钎焊工艺对黄铜接头组织的影响 - In this paper, the firm and imperishable joint between steel base and diamond grain was realized by using high-frequency induction brazing with the powdered brazing filler metal of alloy Ni-Cr, and by properly controlling the brazing current and time.
采用高频感应钎焊的方法，用Ni-Cr合金粉末做钎料，适当的控制钎焊电流和钎焊时间，实现了金刚石与钢基体的牢固焊接。 - Optimization selection of power source frequency in high frequency induction brazing
高频感应钎焊中电源频率的优化选择 - Study of Heat Treatment Technics on Carbide Joint by High Frequency Induction Brazing
高频感应钎焊硬质合金接头热处理工艺研究 - Application of High Frequency Induction Brazing of Conduits in Aircraft Manufacture
导管高频感应钎焊在飞机制造中的应用 - Based on the principles and characteristics of the hi-frequency induction heating apparatus controlled by silicon-control, the fuzzy control system for hi-frequency induction brazing polycrystalline diamond compacts was developed by utilizing SCM-technology and fuzzy control methods.
根据高频感应加热设备使用可控硅控制的原理和特点，采用单片机技术和模糊控制的方法，开发出聚晶金刚石（PCD）复合片高频感应钎焊模糊控制系统。 - In order to solve the problem that brazing filler metal power and flux bring for stainless steel-aluminum by high frequency induction brazing, the brazing grease is developed.
为了解决不锈钢-铝高频感应钎焊用的粉末状钎料、钎剂所存在的缺点，研制了膏状钎料。 - Investigation of Induction Brazing Technology of Ag CdO Contact to Cu Bridge
Ag-CdO触头与Cu触桥感应钎焊工艺研究 - A new resonance frequency auto tracing technology for IGBT induction brazing power source
一种新型逆变式感应钎焊电源频率自动跟踪技术 - Induction brazing TiAl/ 40Cr with Ag-Cu-Ti filler metal
Ag-Cu-Ti钎料高频感应钎焊TiAl/40Cr - Fuzzy Control& Synchronization Data Collecting System of Hi-frequency Induction Brazing for Polycrystalline Diamond Compacts
PCD高频感应钎焊模糊控制及同步数据采集系统 - More than one hundred motor rotors have been welded using integral induction brazing of end ring, which just have been used successfully for the areas of wind power generation, civil using and railway and so on.
采用端环的整体感应钎焊工艺，已成功焊接了上百台电机转子，并投入到风电、民用、铁路等行业营运的过程中，无一例出现问题。 - It is feasible to joint Be and SS with AlSi_ 12 by induction brazing.
使用铝硅钎料进行感应钎焊实现Be/SS连接是可行的。 - Design of temperature control system of high frequency induction brazing diamond tool
高频感应钎焊金刚石工具温控系统设计 - Interfacial microstructure and mechanical properties of induction brazing TiAl/ 40Cr joints
TiAl/40Cr高频感应钎焊接头的界面组织及力学性能 - The influence of different induction brazing parameters on the temperatures of the inner and external surfaces of the workpiece was mainly discussed, and the influence of brazing parameters on base material microstructures and joint quality was analyzed.
研究了感应钎焊时，不同钎焊参数对零件内外表面温度的影响，分析了钎焊工艺参数对母材组织和接头质量的影响。 - Characteristics of Interface Between Beryllium and HR-1 Stainless Steel by Induction Brazing
铍与HR-1不锈钢感应钎焊界面特性研究 - The induction brazing process test was carried out by using the developed equipment. The interface reaction behavior among the filler, the diamond and the substrate was analyzed. 4.
利用所研制的感应钎焊工艺装置进行了钎焊线锯工艺试验，分析了高温下钎料与金刚石以及钎料与基体之间的界面反应机理。